IoT WiFi module > Power Line Communication Module > LX200V10/20

Power Line Communication PLC Module LX200V10/20

Standard Ethernet interface is provided, and it is convenient for connecting computer, IP camera, IP telephone and other network equipment; Twisted pair / Power line / Coaxial cable are supported; Frequency band of 2~21MHz or 2~30MHz is occupied for communication, and the current CATV signal or wired broadcasting is not affected

  • ☼ Media (multiple media is supported): power line, twisted pair, coaxial line
  • ☼ Speed: The rate of physical layer is 200Mbps, and the actual transmission rate can reach 80Mbps; IPTV, HDTV and other audio and video signal can be smoothly transmitted;
  • ☼ 128 bit AES encryption is supported to protect network communication security;
  • ☼ Communicate via frequency band of 2~30MHz, and the current CATV signal or wired broadcasting is not affected;
  • ☼ Following the IEEE1901 and Home Plug AV standards, a maximum of 4 modules are allowed
  • ☼ If communicating with LX200V10, under an ideal environment, 1 LX200V10 supports a maximum of 63 LX200V20 in the network-connecting

Supplier

Shenzhen Headquarters

  • Room 1007, Hangsheng Technology Building, South Four Road, Science and Technology Park, Nanshan District, Shenzhen
  • TEL: 0755-86108311
  • Fax: 0755-86152201

Shanghai R&D Center

  • B205 Lvliang Technology Pioneer Park, 2588 Hongmei South Road, Minhang District, Shanghai
  • TEL: 021-61553990
  • Fax: 021-54721038

Beijing Office

  • Tencent Zhongchang Zone, Huilongguan, Changping District, Beijing
Introduction Specifications Application Specifications

Introduction

Standard Ethernet interface is provided, and it is convenient for connecting computer, IP camera, IP telephone and other network equipment; Twisted pair / Power line / Coaxial cable are supported; Frequency band of 2~21MHz or 2~30MHz is occupied for communication, and the current CATV signal or wired broadcasting is not affected

Features

  • ☼ Conform with 802.11b/g/n protocol;
  • ☼ Standard Ethernet interface is provided, and it is convenient to connect computer, IP camera, IP telephone and other network equipment;
  • ☼ Two types of interface, i.e. twisted pair and coaxial cable, are provided, which makes it convenient for the connecting of up and down cables.
  • ☼ Frequency band of 2~21MHz or 2~30MHz is occupied for communication, and the current CATV signal or wired broadcasting is not affected;
  • ☼ It can enter the operation status after the completion of cable-connecting without the user's configuration;
  • ☼ Existing cable can be applied to CATV, power line, broadcasting line, etc., through Frequency Division Multiplexing (FDM);
  • ☼ Modulation and demodulation is based on OFDM mode, and the modulation is of high efficiency;
  • ☼ LX200V10 is with 200Mbps physical layer and 80Mbps network layer;
  • ☼ LX200V10 supports the grid-connection of a maximum of 64 sets (including LX200V20), and as for special configuration the number can reach 253;
  • ☼ Special requirements. carrier frequency can be customized for the customer, and it is more convenient for frequency division multiplexing (FDM) with existing cable;
  • ☼ By customizing the frequency, the bandwidth of shared network can be reduced, so as to achieve longer transmission distance;
  • ☼ Metal shell similar to power switch is adopted, which makes it convenient to be installed into existing products;

Application fields

  • ☼ For places such as mines, militaries, stations, trains, etc. where it is inconvenient for new cables, the existing cable resource can be utilized

Specification parameters

Items Description
LX200V10
IP interface 10/100M adaptive to 1 coaxial cable interface and 1 twisted pair interface of Ethernet port (Auto MDI/MDIX) and switch 1 external power interface through the switch toggle
IP standards IEEE 802.3, IEEE 802.3x,
IEEE 802.3u Auto MDI (X)
IEEE 802.1P,IEEE 802.1Q
Performance Physical layer rate: 200Mbps throughput of MAC layer : 80Mbps
Indicator lights SYS light: green LED light is the system self-test light. Generally, 1-2 seconds after power-on, the light stays ON if the system testing is normal.
LINK light: Red LED light is the road-light of system chain. It stays on or flickers after it has detected other devices.
Net-port LINK light: it stays ON when network cable is properly inserted into the net-port.
Net-port ACT light: when there is no data, the light is off.
RF parameters Occupied frequency: 2~30MHz Receiving sensitivity: -66 dBm
The maximum output power: 6 dBm
Interface type: BNC socket and 7.55MM connector socket
Modulation mode OFDM QAM 1024/256/64/16/8, QPSK, BPSK and ROBO
Encryption mode 128 AES encryption
Power supply 12-15V 500MA
Boundary dimension 100 x 58 x 31(mm)
Weight 150g
Operating temperature -10°C~+50°C -20°C~+70°C
Operating humidity 20%~85% non-condensation
Storage humidity 10%~90% Non-condensation
Power consumption < 7W