Autumn Launch
hey, let's connect

Autumn Launch 2022

New innovations developed to make IoT easier than ever

WisGate Connect
WisGate Connect: a complete solution based on Raspberry Pi Compute Module 4.

WisGate Connect: a complete solution based on Raspberry Pi Compute Module 4.

  • Equipped with quad-core CPU, up to 32Gb of built-in storage and up to 8Gb of RAM.
  • Modular IoT platform for multi-radio access networks and IoT protocols.
  • Supports LoRaWAN subGHz and 2.4GHz, 4G, 5G, WiFi6, ZigBee, WiFi HaLow and more.
  • Included tools like Python 3 and Docker Engine, ready to use containers and applications like NodeRED, LoRaWAN Packet Forwarder, LoRaWAN Network Server.
WisDM
WisDM Update

WisDM Update

  • Get prompt notifications, enable reports on your solar battery activity and upgrade your gateways firmware.
  • An option for displaying gateway performance statistics and the System Log to monitor all the activity remotely.
  • Access real-time using SSH to access information of each gateway, or use the Historical System Log settings to view important device information even filtered in different time periods.
WisGate
WisGateOS 2 + WisGate Edge V2

WisGateOS 2 + WisGate Edge V2

  • The new generation of our Edge hardware and software is now available for purchase.
  • A growing catalog of Extension plug-ins for easy customization by adding additional functionality to the OS.
WisNode
Sensor Hub: out-of-the-box solution!

Sensor Hub: out-of-the-box solution!

  • It is fully compatible with WisToolBox, used for configuration via BLE+NFC.
  • Allows flexibility in sensor combinations with pre-selected Sensor Probes and an option to add third-party sensors over Probe IO via the proprietary one-wire communication protocol.
  • An option of connecting multiple probes to the same configuration via the Probe Splitters and optimally positioning them with the Extension Cables.
WisToolBox
Configure LoRaWAN devices with WisToolBox!

Configure LoRaWAN devices with WisToolBox!

  • Equipped with the function to configure Sensor Hub. There is no need to start from scratch because the Sensor Probes come pre-configured and are automatically detected by the app.
  • Allows you to test different device configurations. It can save a configuration as a template, and quickly load it on different devices.
  • Has support for custom AT commands: create your own custom AT commands using RUI3, then read and send custom AT commands using the dynamic user interface or console terminal.
WisBlock Audio

IoT applications have a lot of potential for converting these noises into digital data. These new modules are an excellent option for developing applications that require audio monitoring, processing, and playback!

  • WisCore
  • Interposer
  • Microphones
  • Amplifiers
  • Kits
  • Accessories
A new WisBlock Core RAK4631-C feature coming your way!

A new WisBlock Core RAK4631-C feature coming your way!

  • Get an option with pre-programmed Cyberon license to run the Cyberon Voice Processing software.
  • Cyberon version is the same as the Arduino version with the addition of a license to run the Cyberon Voice Processing software.
RAK11200-C: A new WisBlock Core RAK11200 feature

RAK11200-C: A new WisBlock Core RAK11200 feature

  • Based on the ESP32
  • Cyberon version is the same as the Arduino version with the addition of a license to run the Cyberon Voice Processing software.
WisBlock Audio Interposer

WisBlock Audio Interposer

  • Allows you to use multiple WisBlock Audio boards on a single WisBlock IO slot.
20-20kHz Microphone

20-20kHz Microphone

  • Includes the Knowles SPK0641HT4H-1 microphone with an audio range of 20Hz to 20kHz.
  • General audio, speech recognition, and bioacoustics applications.
100-10kHz Microphone

100-10kHz Microphone

  • Based on an MP34DT06 microphone by STMicroelectronics
  • With an audio detection range of 100 Hz to 10 kHz.
  • General audio and bioacoustics applications.
Ultrasonic Microphone

Ultrasonic Microphone

  • Highest audio range. Can work in an audio range from 20Hz to 80kHz, based on the Knowles SPH0641LU4H-1 microphone.
  • Useful in industrial applications, bioacoustics and more sounds that cannot be detected in the normal audio range.
Stereo Mic Header Board

Stereo Mic Header Board

  • A breakout module that allows you to connect up to two RAK PDM microphone modules.
  • Compatible with the WisBlock IO slot or the WisBlock Audio Interposer.
Analog Mic to I2S

Analog Mic to I2S

  • A stereo analog microphone to I2S module based on the Nuvoton NAU85L40B Audio ADC.
  • Allows a user to connect up to two analog microphones into a WisBlock System.
5.6W Stereo Amplifier

5.6W Stereo Amplifier

  • An audio amplifier module, based on two Texas Instruments TAS2560 amplifiers, to achieve a stereo amplifier.
  • Suitable for audio/music player and streaming playback.
5.6W Amplifier

5.6W Amplifier

  • Based on a single Texas Instruments TAS2560 amplifier.
  • A mono amplifier suitable for use in applications such as voice assistants or any other type of audio notifications.
Analog UniDirectional Microphone Kit

Analog UniDirectional Microphone Kit

  • Allows you to listen for sounds in a forward direction while reducing sounds from behind the microphone.
WisBlock Microphone Interposer Kit

WisBlock Microphone Interposer Kit

  • Use a microphone on your WisBlock system and mount it away from the base board
  • Comes with an SD card slot for configuration.
  • Includes an Audio Interposer module (RAK18003), a PDM microphone, an optional custom audio case to put it in, and all the necessary screws and cables.
WisBlock Speaker Amplifier SD Kit

WisBlock Speaker Amplifier SD Kit

  • Use this to develop sound applications using amplifiers.
  • Includes a RAK18003 audio interposer, and an amplifier (stereo or mono), and you can optionally select a speaker.
  • Comes with all the necessary accessories to connect the modules electrically and mechanically to each other.
WisBlock Remote Microphone Kit

WisBlock Remote Microphone Kit

  • Allows you to use a PDM microphone module in your WisBlock audio system by mounting the microphone away from the base board.
WisBlock Stereo Microphone Kit

WisBlock Stereo Microphone Kit

  • Allows you to use two PDM (stereo) microphone modules in your WisBlock audio system.
  • Provides the possibility to mount the microphones away from the base board and separate from each other.
  • Includes a RAK18033 stereo header module, a PDM microphone module, and everything you need to stack the modules.
Amplifier Microphone & SD Kit

Amplifier Microphone & SD Kit

  • Includes a microphone and amplifier in the same kit and also has an SD card slot.
  • Equipped with a RAK18003 Audio Interposer, an Amplifier Module (Mono or Stereo), a PDM Microphone Module, everything you need to connect the modules.
  • Purchase an optional speaker and custom casing.
WisBlock Voice Processing Kit

WisBlock Voice Processing Kit

  • Designed for voice control.
  • The PDM microphone module listens while the DSP module performs analysis on the audio to determine if trigger words or commands are said.
  • Includes an audio interposer module (RAK18003), a PDM microphone module (RAK18030) and a DSP module (RAK18080).
WisBlock Voice Processing Speaker Kit

WisBlock Voice Processing Speaker Kit

  • Includes all the WisBlock Audio module types for audio projects, it has a microphone, DSP and Amplifier modules, allowing you to develop many types of projects related to sounds.
  • Has an audio interposer module (RAK18003), a PDM microphone module (RAK18030), an amplifier module (RAK18060), and a DSP module (RAK18080), a custom case, and all necessary tools for connections.
Speaker Connector Cable

Speaker Connector Cable

  • Suitable to connect your speaker to the speaker connector of your RAK18060 or RAK18061 module. It has a length of 200mm.
Microphone wire

Microphone wire

  • Suitable to connect the microphone RAK18040.
  • Has a length of 200 mm.
Amplifier Connector Cable

Amplifier Connector Cable

  • Suitable to connect your power source to the power connector of your RAK18060 or RAK18061 module.
  • Has a length of 200 mm.
PDM Microphone FPC

PDM Microphone FPC

  • Used to connected your RAK PDM Microphone module to a WisBlock Audio Interposer module.
  • Lengths available are 50 mm and 120 mm.
M8 Power Connector

M8 Power Connector

  • Waterproof connection into your WisBlock Enclosure.
Speakers

Speakers

  • Use with the RAK18060/18061.
  • Has an audio power of 3W, 4 Ohms of input impedance, 93 dB SPL at 10cm and a size of 70x31x17.5mm.
WisBlock audio spacer kit

WisBlock audio spacer kit

  • Allows you to mechanically join the modules together into a robust stack.
Microphone Enclosure for WisBlock Audio

Microphone Enclosure for WisBlock Audio

  • Optimized to protect your WisBlock audio project and has a space to place a microphone.
Speaker Enclosure for WisBlock Audio

Speaker Enclosure for WisBlock Audio

  • Suitable if you are working on a project that uses amplifiers. It is ready to use in the provided enclosure.
Microphone & Speaker Enclosure for WisBlock Audio

Microphone & Speaker Enclosure for WisBlock Audio

  • Ideal if you need a space for a microphone and speaker. It is suitable for a voice assistance project.
WisBlock Modules

Check out our latest modular hardware release and experience versatile IoT solutions.

9DOF Motion Sensor TDK MPU9250

9DOF Motion Sensor TDK MPU9250

  • Add a low cost 9-axis movement (9DOF) motion sensor to the WisBlock system.
CO2 Sensor Sensirion SCD30

CO2 Sensor Sensirion SCD30

  • Add high precision CO2 sensor to the Air Quality sensor products of the WisBlock ecosystem.
  • Based on the Sensirion SCD30 sensor and also comes with temperature and humidity sensors.
Particle Matter Sensor Plantower PMSA003I

Particle Matter Sensor Plantower PMSA003I

  • Enables you to monitor air particles with WisBlock
  • With a minimum distinguishable particle diameter of :0.3 micrometer and a particle Range of measurement: 0.3~1.0, 1.0~2.5, 2.5~10 Micrometer(μm).
CAN Bus Interface Microchip MCP2518FD

CAN Bus Interface Microchip MCP2518FD

  • Supported by WisBlock with the new RAK13006 interface module.
  • Allows you to extend your communication protocols options with CAN bus which is widely used in automotive applications, building and industrial control systems.
SDI-12 Interface

SDI-12 Interface

  • Extends the WisBlock communication protocols with 3-wire SDI-12 communication cable standard.
  • Provides the 12V supply for the SDI-12 sensors and has an option to use an external 12V supply if required.
UWB Module Decawave DWM1000

UWB Module Decawave DWM1000

  • Supported by WisBlock with RAK13801.
  • It can determine the position of assets within centimeters and also counts with an expanded communications range, which reduces the amount of infrastructure required in RTLS.
USB Battery Power Slot Module

USB Battery Power Slot Module

  • The perfect solution for applications that are powered by non-rechargeable batteries.
  • Provided with a connector for non-rechargeable batteries and the USB for programming and setup of the WisBlock.
PoE Power Slot Module

PoE Power Slot Module

  • The RAK19017 power board with the Silvertel Ag99005MT POE converter is the perfect solution for applications that are powered by PoE.
  • Equipped with the IEEE802.3af compliant and an input voltage range from 36V to 57V.
Earthquake Sensor Omron D7S

Earthquake Sensor Omron D7S

  • Smallest seismic sensor to detect earthquakes based on the Omron D7S with a built-in option for automatic alert if seismic level is 5 or higher.
  • Can be combined with WisBlock for a long range communication capabilities.

Unify Enclosure

We expanded the Unify Enclosure with a larger version to provide you more flexibility when placing your WisBlock solutions (or other devices)! Furthermore, we are providing you with additional attachments and mounting possibilities.

We expanded the Unify Enclosure with a larger version to provide you more flexibility when placing your WisBlock solutions (or other devices)! Furthermore, we are providing you with additional attachments and mounting possibilities.

  • A bigger version with a size of 180 x 130 x 60 mm giving you plenty of space.
  • IP65 rated and is fire retardant
  • Enhanced UV resistance
Unify Pole Mounting Horizontal Kit (Type B)

Unify Pole Mounting Horizontal Kit (Type B)

  • Allows you to mount your solution to a pole (60-85mm diameter is advised)
  • Three pole mounts to cover all enclosure sizes. Two of them will support landscape orientations and one of the mounts is for vertical orientation.
Belt Clip Kit (Type E)

Belt Clip Kit (Type E)

  • Allows you to hook a device over a belt which can be attached to a person or object.
  • Easy mounting option for asset tracking or network mapping.
Unify DIN Rail Mounting Kit (Type F)

Unify DIN Rail Mounting Kit (Type F)

  • Most devices in industrial applications can be installed using this mounting kit.
The Unify Magnet Mounting Kit (Type G)

The Unify Magnet Mounting Kit (Type G)

  • A general purpose mount that uses magnets to attach the solution to metal objects.
  • Used for shipping containers for tracking or in refrigeration units to control temperature.
The Belt Loop Kit (Type H)

The Belt Loop Kit (Type H)

  • Similar to the Belt Clip Kit (Type E) but the actual loop in which the belt will be threaded through.
  • Adds more security to the mounting mechanism because the belt or strap must be removed to remove the device.
The Label Kit (Type I)

The Label Kit (Type I)

  • A general purpose mounting kit that allows you to easily identify the device you have installed
  • Visible from the front of the solution.
The Hook Loop Kit (Type J)

The Hook Loop Kit (Type J)

  • Supports device by the hook feature.
  • Can be used as a temporary installation method for devices that doesn’t allow drilling or screwing.